Wondering about the right 2013 Ford Edge transmission fluid, when to change it, and how much it can take? Let’s cut to the chase and get you started.
The 2013 Ford Edge uses Motorcraft Mercon LV ATF (XT-10-QLV) transmission fluid. And, you’ll need to change the fluid every 30k or 150k. This car can hold 9.0 – 11.0 quarts. Plus, the dipstick is located under the hood near the air intake filter housing.
Since it’s hard to cover all the details in 3 lines – let’s dive into the essential details explained below. Keep On Reading…
Table of Contents
The 2013 Ford Edge Transmission Fluid Change Interval!
Maintaining your 2013 Ford Edge car’s transmission will require changing its fluid at the right time. Before doing so, it’s natural to ask when should I change the transmission fluid in my 2013 Ford Edge car.
You should change the transmission fluid every 30k or 150k miles in your 2013 Ford Edge car. To simplify it, just change the fluid every 1.8 or 9 years. The proper change interval depends on how you drive.
Look at this table and detail to understand it better:
| Driving Condition | Change Interval (in Miles / Kilometers) | Change Interval (in Years) |
| Normal | 150,000 miles (240,000 kilometers) | 9 years |
| Special | 30,000 miles (48,000 kilometers) | 1.8 years |
- In Normal Driving Condition: You’ll need to change the transmission fluid once every 150k miles (240k kilometers) or 9 years.
- In Special Driving Condition: You’ll need to replace the transmission fluid once every 30k miles (48k kilometers) or 1.8 years. It applies if you do the following things:
- Take your car on dusty or sandy roads.
- Idle extensively.
- Drive at low speed for a long time.
- Use a carrier or trailer.
The 2013 Ford Edge Transmission Fluid Type!
As Ford suggests to its users a specific kind of transmission fluid to use, filling the tank with others can cause harm to the transmission.
Based on Valvoline, using the wrong kind of transmission fluid in your car can cause terrible noise, overheating, and sometimes gear slipping issues. So, it’s best to use the right one that is made for your car instead of the suggested item.
Now, you might wonder exactly what kind of transmission fluid does a 2013 Ford Edge take.
A 2013 Ford Edge takes Motorcraft® Mercon LV (XT-10-QLV) transmission fluid. Well, Ford suggests using this kind of fluid on all cars with 6F35 and 6F50 transmissions.
The 2013 Ford Edge Transmission Fluid Capacity!
To add the right portion of Ford transmission fluid to your 2013 Edge car, it’s vital to know its fluid capacity. Usually, it’s written in the owner’s manual.
So, how much transmission fluid does a 2013 Ford Edge hold?
A 2013 Ford Edge can hold around 9.0 – 11.0 quarts of transmission fluid. The exact amount of fluid that the car can carry depends on the transmission type.
Let me explain it in detail:
| Transmission Type | Code | Fluid Capacity |
| 6F35 Automatic | 6 | 9.0 quarts (18 pints or 8.5 liters) |
| 6F50 Automatic | J | 11.0 quarts (22 pints or 10.4 liters) |
- If your car comes with the 6F35 automatic transmission, it can hold no more than 9.0 quarts (18 pints or 8.5 liters) of fluid in the tank.
- For a car with the 6F50 automatic transmission, it can carry around 11.0 quarts (22 pints or 10.4 liters).
Where Is the 2013 Ford Edge Transmission Dipstick Location?
To check the fluid level, you may need to find the location of the transmission fluid dipstick in the 2013 Ford Edge car.
So, where is the transmission dipstick on a 2013 Ford Edge?
The transmission dipstick is near the air filter assembly on a 2013 Ford Edge car. However, some cars might not have dipstick inside the car.
Well, if your car has a 6F50 transmission, you’ll find the dipstick on the left side of the air filter intake housing. It’s usually hidden under the hood.
To reach it, open the hood of your car and look in the direction described. Then, pull the dipstick upward and you can use it.
However, if your vehicle contains a 6F35 transmission, it doesn’t come with a dipstick to begin with. In that case, you can check the fluid via the Ford dealer as they will do a complete drain and add the fresh fluid or flush.
How To Check and Add Transmission Fluid On 2013 Ford Edge?
The 2013 Ford Edge transmission fluid check process is only possible if your car comes with the dipstick. Here’s how to do it yourself:
- To begin with, you’ll need to take the car for a spin, about 20 miles, or until it warms up nicely.
- Then, you should park the car on a flat surface and put on the parking brake. All set!
- Next, press the brake pedal, idle the car, and shift through all the gears. During this, hold each gear for 10 seconds or so.
- Afterward, move the gear stick to ‘P’ (Park) and run the engine. Now, find the dipstick under the hood and pull it out
- After that, clean the dipstick and reinsert it into the tube to check the fluid level.
- Finally, add some fluid based on how much it needs.
Final Takeaways
After learning about the 2013 Ford Edge transmission fluid, it’s best to take care of your car in the right way. Be sure to maintain the transmission by adding the right type and amount of fluid.
For better help, you should check the owner’s manual or ask an expert for help. Hope you like this guide and find it beneficial. Have a Wonderful Day!
Now, look at this interesting guide that shows all the details from 2007 to 2024 or above Ford Edge transmission fluid. Start Reading Here!
