When it comes to taking care of your car, knowing the 2011 Ford Escape transmission fluid type, capacity, change interval, and so on details is crucial before doing anything.
Well, the 2011 Ford Escape transmission fluid capacity is around 2.4 or 9.0 quarts based on transmission type. You can use either Motorcraft SAE or Mercon-type fluid. And, Ford suggests changing fluid between 30k to 150k miles based on driving style.
If you don’t know much about the fluid, this guide will help! Here, I’ll explain all about the fluid that you should know as a user of the 2011 Escape car. Let’s Get Started!
Table of Contents
2011 Ford Escape Transmission Fluid Capacity!
Before you put the Ford transmission fluid, it’s vital to know the capacity of your car’s transmission. The 2011 Escape car has diverse ability to hold fluid in the tank based on the transmission type. Here’s what I mean:
| Transmission Type | Code | Capacity |
| 5-speed manual | 3 | 2.4 quarts (2.3 liters) |
| 6-speed automatic | 6 | 9.0 quarts (8.5 liters) |
- In case your car has a 5-speed manual transmission, the fluid capacity is no more than 2.3 liters (2.4 quarts).
- If your car has a 6-speed automatic transmission, the tank can hold around 8.5 liters (9.0 quarts) of fluid.
How Often Should You Change the Transmission Fluid in a 2011 Ford Escape?
Based on how you use the car, the 2011 Ford Escape transmission fluid change interval can be different. Let me explain this in a simpler way:
For Normal Driving
- If you drive normally, change the fluid every 60,000 miles (96,000 km) or about 4 years for an automatic transmission.
- For both manual and automatic transmissions, change the fluid every 150,000 miles (240,000 km) or 9 years.
For Occasional Driving
If you drive in special conditions, the change interval for fluid will vary. To understand it better, take a look at the given conditions:
- If idling or driving slowly for long distances, traveling on dusty roads, or going off-road, change the fluid like this –
- For Manual Transmission: Change it every 50,000 miles (80,000 km).
- For Automatic Transmission: Change it every 30,000 miles (48,000 km).
- If using a trailer, camper, or car carrier, replace the automatic transmission fluid every 30,000 miles (48,000 km). And, if your car comes with a manual transmission, change the fluid every 60,000 miles (96,000 km).
What Is the 2011 Ford Escape Transmission Fluid Type?
Unlike the 2013 Ford Escape transmission fluid type, it comes with 2 kinds of transmission types, 6-speed automatic and 5-speed manual. Both transmission type suits diverse fluid to use in the 2011 Escape car. To understand it better, keep on reading:
| Transmission Type | Fluid Name | Part Name | Spec |
| 5-speed manual | Motorcraft SAE 75W-90 Gear Oil | XT-4 -QGL | WSS-M2C203-A1 and GL-4 |
| 6-speed automatic | Motorcraft MERCON LV ATF | XT-10-QLV | MERCON LV |
- If your 2011 Escape car has a 5-speed manual transmission, you should use Motorcraft SAE 75W-90 gear oil. To find the right item, note that the fluid part is XT-4 -QGL.
- For a 2011 Escape car with a 6-speed automatic transmission, you should use Motorcraft MERCON LV ATF fluid. The right part for this kind of fluid is XT-10-QLV.
Where Is the Transmission Fluid Dipstick on a 2011 Ford Escape?
The 2011 Ford Escape transmission dipstick location can vary based on the transmission type. To understand it better, here’s the details:
In Automatic Transmission
- If the car comes with a 3.0L V6 engine, the transmission fluid dipstick is under the hood, near the power distribution box.
- If the car has a 2.5L I4 engine, the transmission fluid dipstick is under the hood, near the brake/clutch fluid reservoir area.
In Manual Transmission
If your 2011 Escape car comes with a manual transmission, you’ll find the dipstick inside the check filler plug. To find it, you’ll need to go under the car and look at the front driver’s side of the transmission housing. Then, take out the check filler plug and you’ll find the dipstick inside.
How Do You Check and Add the Transmission Fluid on a 2011 Ford Escape?
Depending on the transmission type, the procedure of checking and adding the fluid to your 2011 Escape car is different. Here’s the instruction for each:
Checking and Adding Automatic Transmission
- Firstly, run your car for 20 miles (30 km) to warm up the transmission fluid. If you’ve been driving at high speeds, in heavy traffic, or towing, let the car sit turned off for up to 30 minutes to cool the fluid down.
- Next, park your car on a flat or even surface and engage the parking brake.
- Afterward, keep your foot on the brake pedal, start the engine, and move the gearshift through all gears one by one. Give each gear 5 seconds before changing.
- Then, set the gearshift to ‘P’ (Park) and keep the engine running.
- After that, find the transmission dipstick and remove it. Then, clean it with a lint-free cloth before inserting it into the transmission tube to check the fluid level.
- Lastly, read the fluid level before you add fluid using a funnel.
Checking and Adding Manual Transmission
- To begin with, park your car on a flat or even surface and engage the parking brake.
- Next, put the car in first gear to ensure it doesn’t move.
- Afterward, locate the check filler plug under the car near the transmission housing. Then, detach the big bolt and clean the filler plug area.
- Then, check the fluid level and read it out before adding extra fluid to your car.
- Once everything is done, reinstall and securely tighten the fill plug.
Wrapping Up
Now that you know all about the 2011 Ford Escape transmission fluid, taking care of your car’s transmission will become easier.
Be sure to check or add transmission fluid on a regular basis using the right type. By following the given procedures for checking and refilling the transmission fluid, you’ll keep your Escape running smoothly on the road ahead. Hope this helps you a little. See Ya!
Now, don’t miss out on this interesting guide which explains all about the 2014 – 2015 Ford Escape transmission fluid. Start Reading!
