If you drive a Ford Escape from 2013 to 2014, you might be curious about the details on the transmission fluid.
As for the 2013 – 2014 Ford Escape transmission fluid info, the tank holds about 8.8 to 9 quarts of fluid, and Ford recommends using Mercon LV fluid. And, they advise changing it between 30,000 to 150,000 miles, depending on how you drive.
If all this seems confusing, don’t worry! I’ll explain how much fluid it can hold, what type to use when to change it, and so on for your better understanding. Let’s Dive In!
Table of Contents
How Much Transmission Fluid Do I Need For a 2013 to 2014 Ford Escape?
When you’re performing a fluid change or maintenance, it’s vital to know the tank’s ability to hold the fluid to avoid overfilling. Based on the year your Ford Escape is made, the capacity of transmission fluid will be different. let me explain it below:
2013 Ford Escape Transmission Fluid Capacity
If you own a 2013 Ford Escape, your car’s transmission tank can carry no more than 8.5 liters (9.0 quarts) of fluid. Based on one user in the 2013+ Ford Escape Forum, the car’s transmission will need around 4 quarts of fluid when the tank is drained fully.
2014 Ford Escape Transmission Fluid Capacity
For those who have 2014 Ford Escape cars, the transmission tank can hold approximately 2.2 gallons (8.8 quarts) of fluid. And, if you drain the tank fully, you’ll need to fill up to 4.23 quarts of fluid to refill.
What Type of Transmission Fluid Does a 2013 to 2014 Ford Escape Take?
For the 2013-2014 Ford Escape cars, the ideal transmission fluid to use is none but the Motorcraft Mercon LV (XT-10-QLV). And, it’s the same as the 2015 Ford Escape transmission fluid type.
Well, Ford recommends this kind of fluid to keep the moving parts lubricated and ensure the transmission is working fine. You can buy it from a Ford dealer.
If you can’t get the Mercon LV fluid, you can use any Dexron VI series fluid from local stores, based on the Vehicle History.
One option you can try is Valvoline Dexron VI/Mercon LV synthetic ATF which seems good to me. It does a good job of keeping the transmission parts lubricated.
How Often Should You Change the Transmission Fluid in a 2013 – 2014 Ford Escape?
To ensure the better health of your transmission, you’ll need to change the fluid on a regular basis based on the driving conditions. Here’s the detail of the 2013 to 2014 Ford Escape transmission fluid change interval:
For Normal Driving
Just like the 2016 Ford Escape transmission fluid change interval, if you are driving your car in the usual state, it’s best to change the automatic transmission fluid every 150,000 miles (240,000 km). In other words, you should change the fluid every 9 years.
For Special Driving
If you are using your car in an occasion state, it’s ideal to replace the fluid every 30,000 miles (48,000 km). This applies if you use a trailer / car-top carrier, idle your car at low speed when going to a long-distance area, or take it on dusty roads.
Where Is the 2013 – 2014 Ford Escape Transmission Dipstick Location?
If you have a 2013 to 2014 Ford Escape car, you might need to check the oil level sometimes. To do that, you need to find a dipstick that is used to measure the oil level. In some cars, you can find the dipstick under the hood or under the car, near the engine.
Unlike the 2011 Ford Escape transmission fluid dipstick location, you won’t find a dipstick on most. And, you’ll need the help of a Ford dealer or local auto store expert to check the fluid level.
In that case, you can find a check filler plug near the transmission area which is used to measure the oil level. To reach it, you need to either remove the tire or go under the car. If you are not sure about it, it’s better to get help from a professional.
Note: To know the location of the 2001 – 2023 Ford Escape transmission fluid dipstick location or above in detail, read this guide.
How to Check and Add Transmission Fluid on a 2013 – 2014 Ford Escape?
To check and add the transmission fluid on your 2013 to 2014 Escape car, you’ll need to do the given instructions:
Check and Add Transmission Fluid with a Dipstick
- Firstly, drive the car for around 30 kilometers to warm up the fluid.
- Then, idle the car for a few minutes and shift all the gear using the gearshift. Be sure it starts and ends with the Park position.
- Afterward, locate the dipstick and pull it out. Then, clean it with a rag and reinsert it into the tube.
- Now, read the fluid level and add some if needed.
Check and Add Transmission Fluid without a Dipstick
- To begin with, lift up the car using the jack stands and pads and remove the tire where the check filler plug is located.
- Then, find the check filler plug and take out the 10mm bolt.
- Afterward, detach the check filler plug and drain all the fluid. You can’t check the fluid level as there’s no dipstick to test it out.
- Once it’s drained fully, clean the surface before adding 4 or 4.23 quarts of fluid based on when your car is made.
Ending Notes
This guide covers everything about the transmission fluid in the 2013 to 2014 Ford Escape! It can be a hassle to search through the manual for fluid details.
I hope this guide helps you discover what you need to know and gives you some guidance. See you in the next guide with another interesting topic, Goodbye!
Make sure not to miss this informative guide if you’re curious about understanding Ford transmission fluid. Enjoy reading it!
