To replace a door ajar switch in a Ford F250, you may need to know its exact location. Well, the Ford F250 door ajar switch location is under the door latch assembly (inside the door frame).
To access it, you’ll need to remove the door trim panels and then take out some parts. Next, unscrew the bolts that hold the door latch assembly in the door frame. Lastly, locate the door ajar switch attached under the latch assembly.
In this guide, I’ll break down more on the exact location of the door ajar switch in the Ford F250 car as well as share the process of how you can easily access it. Let’s Go!
Table of Contents
The Ford F250 Door Ajar Switch Location!
No matter if you have a 2003 F250 door ajar switch or the latest one, the door ajar switch is located inside the door panel. Well, it is attached to the end of the door latch assembly and white in shade (mostly).
Well, a faulty door ajar switch is one of the most common reasons why is your door ajar light on when all doors are closed.
If this ever happens, here’s how you can reach this part in your Ford F250 car:
Step #1: Take Out Door Trim Covers
- To begin with, roll up the window and open the door.
- Then, pull the plastic trim cover near the exterior mirror outward. To do that, detach it by prying 2 metal clips.
- Afterward, pry the trim cover containing the window and door lock switches. Be sure to disconnect the connectors for door lock, window, and window adjustment switches.
- Next, locate and remove a small metal bracket that is secured with a screw. To do that, use a 7mm socket wrench.
- After that, locate and remove the red interior light lens at the lower with a flat screwdriver, the rear part of the door panel.
- Once it’s done, use the socket wrench to detach one screw behind the red lens. Then, lift the entire door panel upwards and tilt the top away from the door.
- Now, reach between the door panel and the door. Then, rotate and disconnect the light socket from the door panel.
- Afterward, lift the door panel upwards to completely remove the trim covers from the door.
Step #2: Take Out All the Parts That Hold the Latch Assembly
- You’ll now need to peel the protective insulation in the door panel and tape it aside.
- Then, locate the latch assembly by checking the owner’s manual.
- After that, detach the interior door lever cable, rubber dust boot, and so on parts.
- Next, hit the actuating lever at the apparatus’s end to detach the cable.
- Afterward, locate and remove the exterior key lock mechanism.
- Then, find and detach the exterior door handle rod by opening the plastic clip’s hinge. Be sure to take out the rod from the plastic clip.
- Once you do so, grab the T27 Torx driver to detach the bolts that hold the door latch assembly to the door frame. Based on the car’s year, the number of bolts can vary. For example, you’ll find 3 bolts on the 1999 to 2007 F250 car.
- Then, expose the panel so you can reach inside.
Step #3: Reach the Door Ajar Switch
- After doing the above steps, you’ll need to move the door lock assembly that can be seen through the big hole.
- Then, locate the door ajar switch that should be attached under the door lock assembly. After that, you can remove the switch by twisting it to half-turn.
Ending Notes
Figuring out the Ford F250 door ajar switch location is quite easy. Just look in the owner’s manual or follow the steps mentioned above. You’ll only need a 7mm socket, flat screwdriver, T27 Torx driver, and tape for the job.
I hope this guide helps you find the door ajar switch in your Ford F250 and don’t forget to give it a shot. See Ya!
