The Ultimate Guide of 2011 Ford Fusion Transmission Fluid!

You need to use Motorcraft brands transmission fluid on your 2011 Ford Fusion cars. Just change it once every 30,000 – 150,000 miles based on the driving state. And, the fluid capacity is around 6 – 15 pints. FYI, you’ll find a dipstick either under the hood or car.

Don’t worry if you are clueless about the fluid’s details! Here, I’ll share all the info related to transmission fluid in your 2011 Ford Fusion car. Let’s Go!

The 2011 Ford Fusion Transmission Fluid Type!

Based on the transmission type, you’ll need to use a specific type of fluid for your 2011 Ford Fusion car.

So, what kind of transmission fluid does a 2011 Ford Fusion take?

A 2011 Ford Fusion takes Motorcraft series transmission fluid. For manual trans, take SAE 75W-90 API GL-4 Gear Oil (XT-4-QGL). If it’s an automatic 6F35 trans, use MERCON LV ATF (XT-10–QLV). And, if it’s automatic Aisin AW F21 trans, grab Premium ATF (XT-8-QAW).

The 2011 Ford Fusion Transmission Fluid Change Interval!

Depending on how you drive, you might have to change the transmission fluid more frequently or less often for a 2011 Ford Fusion. Look at the table and information for details.

In Normal Operating Conditions

• If your car has an automatic transmission,Change the fluid once 150,000 miles (240,000 km) or 9 years.
• If your car has a manual transmission, change the fluid once 150,000 miles (240,000 km) or 9 years.

In Special Operating Conditions

• If you are using a trailer, camper, or car-top carrier, change the automatic transmission fluid once 30,000 miles (48,000 km) or 1.8 years. In the same criteria, change the manual fluid once 60,000 miles (96,000 km) or 3.6 years.
• If you are idling the car continuously or running at low speed for a long period, change the automatic transmission fluid once every 30,000 miles (48,000 km) or 1.8 years.
• If taking the car to a dusty or sandy road, change the automatic transmission fluid once every 30,000 miles (48,000 km) or 1.8 years. In the same criteria, change the manual transmission fluid once every 50,000 miles (80,000 km) or 3 years.

Consider replacing the fluid when its color starts changing.

The 2011 Ford Fusion Transmission Fluid Capacity!

To add a decent amount of fluid in the tank after draining or flushing, you may want to know how many quarts of transmission fluid does a 2011 Ford Fusion take.

A 2011 Ford Fusion takes around 3.0 – 9.0 quarts of the transmission fluid. Depending on the transmission type, it can hold more or less in the tank.

Let me explain it in detail for you:

• If your car comes with a manual G6M transmission, it can hold 6 pints or 2.87 liters of fluid.
• If your car has an automatic 6F35 transmission, it can carry 18 pints or 8.5 liters of fluid.
• If your car contains an automatic Aisin AW F21 transmission, it can take around 15 pints or 7.0 liters of fluid.

Where Is the 2011 Ford Fusion Transmission Dipstick Location?

The location of the dipstick in the 2011 Ford Fusion is diverse based on the transmission types the car has. To put it clearly, you’ll find the automatic transmission dipstick either right beside the brake/clutch fluid reservoir or on the left side of the battery.

You can reach it by opening the hood and looking at the side of the brake/clutch fluid reservoir or battery compartment. Then, pull the yellow loop-like handle and you can see the dipstick.  It’s similar to the 2012 Ford Fusion transmission fluid dipstick location.

However, if your car comes with a manual transmission, the dipstick will be under the car near the transmission housing. To reach it, jack up the car and get underneath. Then, locate the big bolt and simply detach it with a socket. After that, you can see the dipstick.

How To Check and Add Transmission Fluid On 2011 Ford Fusion?

Based on whether your transmission is automatic or manual, checking and adding fluid on 2011 Ford Fusion cars will be diverse, here’s how to do it yourself:

Checking and Adding Automatic Transmission Fluid

• To begin with, drive your car for about 20 miles or until it gets warm from being used.
• Next, park the car on a flat or even surface and put the parking brake on.
• Then, press the brake pedal, start the engine, and shift through all the gears slowly. Be sure to give some time for each gear to work.
• Afterward, put the gearshift in Park and keep the engine running.
• Now, take out the dipstick and wipe it clean with a dry cloth.
• After that, put the dipstick back in the tube properly and read the level. Based on that, add some Ford transmission fluid.

Checking and Adding Manual Transmission Fluid

• Starting with parking the vehicle on a flat surface.
• Next, pull the parking brake all the way and put the first gear.
• Then, make sure the car stays still and Jack up the car before getting under it.
• Afterward, remove the check filler plug and clean its opening.
• Lastly, take out the plug and check the fluid level using the dipstick in the check filler plug. Depending on the level, add some fluid if needed and reinstall all the removed parts.

Wrap Up

That’s everything you need to know about the 2011 Ford Fusion transmission fluid! It’s important to maintain your car’s transmission to avoid slipping gears, noise, or overheating issues.

For more help, check the owner’s manual or talk to an expert. I hope this guide helps you understand the 2011 Fusion’s transmission fluid better. Take Care of Your Car!

Now, check out this helpful guide to learn all about the transmission fluid for the 2008 Ford Fusion. Have fun reading!